Why should I buy from Heritage Tanks?
Heritage Tanks is committed to a stringent high standard of service and product quality control.

Are your tanks Engineer certified?
All Heritage Tanks are fully engineer certified and comply with all shire bylaws and requirements. A full engineer's certificate is available should your shire require it.

What are the tank walls made of?
Our attractive steel wall profile is rollformed in our factory using only Blue Scope zincalume or color bond sheeting. The tank walls are made of a minimum one mm steel unless other wise stated. This is thicker than that of most of our competitors.

What is your liner made of?
Heritage Tanks liners are made of .75 mm thick EVA (Poly Ethylene Vinyl Acetate.) See details of this material under the heading of liners here.

What is my responsibility before the tank is installed?
Make sure all plans and shire bylaws have been adhered to and that the sand pad has been prepared as per our pre installation instructions.

What do I need to have organised on the day of installation?
You need to organise a load of water to be put in the tank (10,000Lt) or let us know if you can not arrange this. We will then organise it and charge accordingly. Finally, you need to have the final payment for your new Heritage Tank available once installation is complete.